Enterasys Security Information and Event Manager, Configuration Manual

Page: 352 / 426

Configuring DSMs
336 S
TARENT
N
ETWORKS
Step 6
Configure the monitor log targets:
logging monitor {msid <ms_id>|username <username>}
The following table provides the necessary parameters:
Step 7
You are now ready to configure the log source in SIEM.
To configure SIEM to receive events from a Starent device:

From the Log Source Type drop-down list box, select the Starent Networks
Home Agent (HA) option.
For more information on configuring log sources, see the Log Sources User Guide .
For more information about the device, see your vendor documentation.
Table 64-4 Monitor Log Parameters
Parameter Description
msid <md_id> Type an msid to define that a monitor log is generated for a
session identified using the Mobile Station Identification
(MDID) number. This value must be between 7 and 16 digits
specified as a IMSI, MIN, or RMI.
username
<username> Type username to identify a monitor log generated for a
session by the username. The username is the name of the
subscriber that was previously configured.