Enterasys Security Information and Event Manager, Configuration Manual

Page: 185 / 426

Configuring DSMs
36 J
UNIPER
N
ETWORKS
This section provides information on the following DSMs:
• Juniper Networks AVT
•
Juniper DX Application Acceleration Platform
•
Juniper EX-Series Ethernet Switch
• Juniper NetScreen IDP
• Juniper Networks Secure Access
•
Juniper Infranet Controller
•
Juniper Networks Firewall and VPN
• Juniper Networks Network and Security Manager
• Juniper JunOS
•
Juniper Steel-Belted Radius
•
Juniper Networks vGW Virtual Gateway
Juniper Networks
AVT
A SIEM Juniper Networks Application Volume Tracking (AVT) DSM accepts events
using Java Database Connectivity (JDBC) protocol. SIEM records all relevant
events. To integrate with Juniper Networks NSM AVT data, you must create a view
in the database on the Juniper Networks NSM server. You must also configure the
Postgres database configuration on the Juniper Networks NSM server to allow
connections to the database since, by default, only local connections are allowed.
NOTE
The procedure in this chapter is provided as a guideline. For specific instructions,
see your vendor documentation.
To integrate SIEM with a Juniper Networks AVT DSM:
Step 1
Log in to your Juniper Networks AVT device command line interface (CLI).
Step 2
Open the following file:
/var/netscreen/DevSvr/pgsql/data/pg_hba.conf file
Step 3
Add the following line to the end of the file:
host all all <IP address>/32 trust