Enterasys Security Information and Event Manager, Configuration Manual

Page: 279 / 426

Configuring DSMs
263
auditing. For information on configuring event auditing, see Configuring Event
Auditing Using Novell iManager .
Loading the XDASv2 on a Linux Operating System
Step 1
Log in to your Linux server hosting Novell eDirectory, as a root user.
Step 2
Type the following command:
ndstrace -c "load xdasauditds"
You are now ready to configure event auditing in Novell eDirectory. For more
information, see
Configuring Event Auditing Using Novell iManager .
Loading the XDASv2 on a Windows Operating System
Step 1
Log in to your Windows server hosting Novell eDirectory.
Step 2
On your desktop, click Start > Run .
The Run window is displayed.
Step 3
Type the following:
C:\Novell\NDS\ndscons.exe
This is the default installation path for the Windows Operating System. If you
installed Novell eDirectory to a different directory, then the correct path is required.
Step 4
Click OK .
The Novell Directory Service console displays a list of available modules.
Step 5
From the Services tab, select xdasauditds .
Step 6
Click Start .
The xdasauditds service is started for Novell eDirectory.
Step 7
Click Startup .
The Service window is displayed.
Step 8
In the Startup Type panel, select the Automatic check box.
Step 9
Click OK .
Step 10
Close the Novell eDirectory Services window.
You are now ready to configure event auditing in Novell eDirectory. For more
information, see
Configuring Event Auditing Using Novell iManager .
Configuring Event
Auditing Using
Novell iManager
To configure event auditing for XDASv2 in Novell iManager:
Step 1
Log in to your Novell iManager console user interface.
Step 2
From the navigation bar, click Roles and Tasks .
Step 3
In the left-hand navigation, click eDirectory Auditing > Audit Configuration .