Enterasys Security Information and Event Manager, Configuration Manual

Page: 88 / 426

Configuring DSMs
72 C
ITRIX
N
ET
S
CALER
For example:
bind system global policy-SIEM -priority 30
When multiple policies have priority assigned to them as a numeric value the lower
priority value is evaluated before the higher value.
Step 5
Type the following command to save the Citrix NetScaler configuration.
save config
Step 6
Type the following command to verify the policy is saved in your configuration:
sh system global
NOTE
For information on configuring syslog using the Citrix NetScaler user interface,
see http://support.citrix.com/article/CTX121728 or your vendor documentation.
Step 7
You are now ready to configure the log source in SIEM.
SIEM automatically detects the Citrix NetScaler device. If you want to manually
configure SIEM to receive events from Citrix NetScaler:

From the Log Source Type drop-down list box, select the Citrix NetScaler
option.
For more information on configuring log sources, see the Log Sources User Guide .