Enterasys Security Information and Event Manager, Configuration Manual

Page: 101 / 426

Configuring DSMs
Enterasys Dragon 85
- Inform - Select the Inform check box.
- Security Name - Type the SNMPv3 username.
- Auth Password - Type the appropriate password.
- Priv Password - Type the appropriate password.
- Message - Type the following on one line:
Dragon Event:
%DATE%,,%TIME%,,%NAME%,,%SENSOR%,,%PROTO%,,%SIP%,,
%DIP%,,%SPORT%,,%DPORT%,, %DIR%,,%DATA%,,<<<%PDATA%>>>
NOTE
Verify that the security passwords and protocols match data configured in the
SNMP configuration.
i
Click OK .
Step 6
Verify that the notification events are logged as separate events:
a
Click the Global Options tab.
b
Click the Main tab.
c
Make sure that Concatenate Events is not selected.
Step 7
Configure the SNMP options:
a
Click the Global Options tab.
b
Click the SNMP tab
c
Type the IP address of the EMS server sending SNMP traps.
Step 8
Configure the alarm information:
a
Click the Alarms tab.
b
Click New .
c
Type values for the following parameters:
- Name - Type
Enterasys Networks-Alarm
.
- Type - Select Real Time .
- Event Group - Select Dragon-Events .
- Notification Rule - Select the Enterasys Networks-Rule check box.
d
Click OK .
e
Click Commit .
Step 9
Navigate to the Enterprise View.
Step 10
Right-click on the Alarm Tool and select Associate Alarm Tool Policy .
Step 11
Select the Enterasys Networks policy. Click OK .
Step 12
From the Enterprise menu, right-click and select Deploy .