Enterasys Matrix 7G4202-30, Hardware Installation Manual

Page: 66 / 110

Connecting to COM Port for Local Management
3-30 Installation
Figure 3-17 Connecting an IBM PC or Compatible
3.8.3 Connecting to a VT Series Terminal
To connect a VT Series terminal to an Enterasys Networks DFE module COM port ( Figure 3-18 ),
use a UTP cable with RJ45 connectors and an optional RJ45-to-DB25 female adapter, and
proceed as follows:
1. Connect the RJ45 connector at one end of the cable
➀
to the COM port
➁
on the
Enterasys Networks module.
2. Plug the RJ45 connector at the other end of the cable
➀
into the RJ45-to-DB25 female
adapter
➂
.
3. Connect the RJ45-to-DB25 adapter
➂
to the port labeled COMM on the VT terminal
➃
.
4. Turn on the terminal and access the Setup Directory. Set the following parameters on your
terminal:
1
UTP cable with RJ45 connectors
3
RJ45-to-DB9 PC adapter
2
RJ45-to-DB9 PC adapter
4
IBM PC or compatible device
1X
G
R
O
U
P
1
11X
7H4382-49
FAST ENET
RESET
COM
CPU MGMT
GROUP
SELECT
GROUP
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
 à Á