Enterasys Matrix 7G4202-30, Hardware Installation Manual

Page: 101 / 110

Memory Locations and Replacement Procedures
Mode Switch Bank Settings and Optional Installations B-9
Figure B-9 Installing the DRAM SIMM on 7H4382-49
or
7H4383-49
Removing the DRAM SIMM from 7G4270-12, 7G4202-30, or 7H4203-72
To remove the existing DRAM SIMM, proceed as follows:
1. Locate the DRAM SIMM connector on the main PC board. Refer back to Figure B-6 .
2. Push the connector arms away from the DRAM SIMM, as shown in Figure B-10 , enough to
release the DRAM SIMM from the connector contacts.
1
Connector arms
3
Connector fingers
2
DRAM SIMM memory module
4
DRAM SIMM alignment notches (2)
Caution: Observe all antistatic precautions when handling sensitive electronic
equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las
precauciones de seguridad para evitar descargas de electricidad estática.
Â
À
À
Á
Ã
Ã