Security Configuration Command Set
Configuring MAC Locking
14-46
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.4.2 show maclock stations
Use this command to display MAC locking information about end stations connected to the device.
show maclock stations
[
port-string
] [
firstarrival
|
firstarrival
port-string
] [
static
|
static
port-string
]
Table 14-5
show maclock Output Details
Output
What It Displays...
Port Number
Port designation. For a detailed description of possible
port-string
values, refer to
Section 4.1.2
.
Port Status
Whether MAC locking is
enabled
or
disabled
on the port.
MAC locking is globally disabled by default. For details on
using
set maclock
commands to enable it on the device and
on one or more ports, refer to
Section 14.3.4.3
and
Section 14.3.4.5
.
Trap Status
Whether MAC lock trap messaging is
enabled
or
disabled
on the port. For details on setting this status using the
set
maclock trap
command, refer to
Section 14.3.4.17
.
Max Static
Allocated
The maximum static MAC addresses allowed locked to the
port. For details on setting this value using the
set maclock
static
command, refer to
Section 14.3.4.7
.
Max FirstArrival
Allocated
The maximum end station MAC addresses allowed locked
to the port. For details on setting this value using the
set
maclock firstarrival
command, refer to
Section 14.3.4.6
.
Violating MAC
Address
Any MAC address(es) violating the maximum static and
first arrival value(s) set for the port.
