Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
6-42
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.2.7
clear spantree portpri
Use this command to reset the bridge priority of a Spanning Tree port to the default value of 128.
clear spantree portpri
[
port-string
]
[
sid
]
Syntax Description
Command Defaults
•
If
port-string
is not specified, bridge priority will be reset for all ports.
•
If
sid
is not specified, bridge priority will be reset on all SIDs.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the priority of Fast Ethernet front panel port 3 to 128:
port-string
(Optional) Resets the priority for specific port(s). For a
detailed description of possible
port-string
values, refer
to
Section 4.1.2
.
sid
(Optional) Resets the port priority for a specific SID.
Matrix>
clear spantree portpri fe.0.3