Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11-75
•
set cep (
Section 11.2.6.2
)
•
set cep port (
Section 11.2.6.3
)
•
set cep policy (
Section 11.2.6.4
)
•
set cep detection (
Section 11.2.6.5
)
•
set cep detection type (
Section 11.2.6.6
)
•
set cep detection address (
Section 11.2.6.7
)
•
set cep detection protocol (
Section 11.2.6.8
)
•
set cep detection porthigh (
Section 11.2.6.9
)
•
set cep initialize (
Section 11.2.6.10
)
•
clear cep (
Section 11.2.6.11
)
11.2.6.1 show cep
Use this command to display CEP phone detection settings.
show cep
[
connections
]
[
detection
] [
policy
] [[
port
] [
port-string
]]
Syntax Description
Command Defaults
If no parameters are specified, all CEP settings will be displayed for all ports.
Command Mode
Read-Only.
connections
(Optional) Displays CEP connections.
detection
(Optional) Displays all discovery parameters being used for
CEP detection.
policy
(Optional) Displays the global CEP policy per protocol.
port port-string
(Optional) Displays CEP status for one or more ports. For a
detailed description of possible
port-string
values, refer to
Section 4.1.2
.