Security Configuration Command Set
Configuring 802.1X Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14-21
14.3.2.4 set dot1x auth-config
Use this command to configure 802.1X authentication.
set dot1x
auth-config
{[
authcontrolled-portcontrol
{
auto
|
forced-auth
|
forced-unauth
}] [
keytxenabled
{
false
|
true
}] [
maxreq
value
] [
quietperiod
value
] [
reauthenabled
{
false
|
true
}] [
reauthperiod
value
] [
servertimeout
timeout
] [
supptimeout
timeout
] [
txperiod
value
]}
port-string
Syntax Description
authcontrolled-
portcontrol auto
|
forced-auth
|
forced-unauth
Specifies the EAPOL port control mode as:
•
auto
- Auto authorization mode. This is the default mode
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
Table 14-2
.
•
forced-auth
-
Forced authorized
mode, which disables
authentication on the port.
•
forced-unauth
-
Forced unauthorized mode, which
filters and discards all frames received on the port.
keytxenabled
false
|
true
Enables (
true
) or disables (
false
) 802.1X key transmission.
maxreq value
Specifies the maximum number of authentictation requests
allowed. Valid values are
1
-
2147483647
.
quietperiod value
Specifies the time (in seconds) following a failed
authentication before another attempt can be made. Valid
values are
1
-
2147483647
.
reauthenabled
false
|
true
Enables (
true
) or disables (
false
) reauthentication control.
reauthperiod
value
Specifies the time lapse (in seconds) between attempts to
reauthenticate a port. Valid values are
1
-
2147483647
.
servertimeout
timeout
Specifies a timeout period (in seconds) for the
authentication server. Valid values are
1
-
2147483647
.