Port Priority and Classification Configuration Commands
Configuring Priority Classification
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9-23
9.3.4.4
clear priority classification
Use this command to clear priority classification entries.
clear priority classification priority_value data_meaning data_value
[
data_mask
]
Syntax Description
Command Defaults
Data masks are required only for classification types requiring a second
data_value
. For details, refer to
Table 9-1
.
Command Type
Switch command.
Command Mode
Read-Write.
Command Alternative (v2.05.xx and higher)
clear policy class
(
Section 8.3.2.4
)
Example
This example shows how to remove the Ethernet II Type IP classification rule from port priority 7:
priority_value
Specifies a port priority (
0
through
7
) associated with the
classification to be cleared.
data_meaning
Specifies the
data_meaning
of the classification to be
cleared. Refer to
Table 9-1
for the list of
data_meaning
numbers and associated protocol types and
classifications.
data _value
Specifies
the
data_value
of the classification to be
cleared. The range of values is dependent on the
data_meaning
. Refer to
Table 9-1
for the limitations.
data_mask
(Optional for most data values) Specifies a value
dependent on the
data_value
entered. For details, refer to
Table 9-1
.
Matrix>
clear priority classification 7 ethernet-II-type IP