dataPAC Windows and Screens
dataPAC User’s Guide
25
Balancing (optional for 1250, included in 1500)
The Balancing program offers a direct method to balance your rotating machinery in one or
two planes.
Analysis (1500 only)
The Analysis program allows you to observe a machine during start-up or coast-down to
analyze the unusual vibration and resonance conditions that occur while you start up or shut
down your machine. It also allows you to quickly collect off-route data.
Memory Card
The Memory Card Manager allows you to look at the contents of a memory card and delete
files you no longer need.
FRF Application (optional for 1500)
The FRF Application provides tools to measure a mechanical system’s frequency response,
allowing you to determine the resonant frequency and the relative dynamic stiffness of a
structure.
Help Menu (1250 only)
The dataPAC contains an extensive context-sensitive online help system that you can access
through the Help icon in the Program Manager or by pressing <SHIFT><LIGHT/HELP> in
any window. In the 1500, you must access the Help Menu by pressing <SHIFT><HELP>.
Remote Xfer (1500 only)
The dataPAC 1500 Remote Xfer program allows you to transfer route and balancing files
from a remote location using an external modem.
Using Edit Windows
The dataPAC uses edit windows when you need to make alphanumeric entries. The example
below shows a typical edit window.
There are two modes for the edit window, either Auto Advance or Manual Advance. You
can toggle between the two by pressing the <SHIFT><F1> softkey combination.
Press <SHIFT><F1>
to toggle between
Manual Advance and
Auto Advance
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
