76
dataPAC User’s Guide
Chapter 3 - Collecting and Reviewing Data
To change the active skip level, press <F1> (Set Skip Level), then use the up and down
arrow keys to set the skip level as desired. Press <F1> (Available Data) when you have
selected the skip level. The next time you press <SKIP>, the dataPAC will skip through the
database at the level you selected.
When any point is displayed in the Review Data window, you can use the <ADV>, <DEC>,
and <SKIP> keys to move between items on a route. The <SKIP> key also allows you to
move between routes. The following table provides details about the use of these keys, as
summarized in this table.
If you reach the end of the route after pressing <ADV> or <SKIP>, the instrument alerts you
with the following Route Information window.
z
To continue operation in the same route, press <SELECT>. This action causes the
dataPAC to return to the Data Collection window and display the first point on the
route.
z
To switch to a different route, press <SKIP> to open the Select Route window. In the
Select Route window, highlight a route name and press <SELECT>, then highlight
DONE and press <SELECT> again.
Key(s)
Result
<ADV>
Move to next point in route
<DEC>
Move to previous point in route
<F2> (Next)
Move to next measurement for the point
<F3> (Previous)
Move to previous measurement for the point
<SHIFT><ADV>
Move to next point “not collected”
<SHIFT><DEC>
Move to previous point “not collected”
<SKIP>
Skip to next item at active skip level
<SHIFT><SKIP>
Skip to previous item at active skip level
<SELECT>
Display selection menu of highlighted level,
allowing you to choose one to move to
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com