manualshive.com logo in svg

EnGenius X-TRA RANGE ERB150H, User Manual

Share
Download
EnGenius X-TRA RANGE ERB150H User Manual Download Page 94

B

ASIC

 N

ETWORK

 S

ETTINGS

P

OINT

-

TO

-P

OINT

 T

UNNELLING

 P

ROTOCOL

 (PPTP)

 

6-43

Static IP Address

My IP Address

  Enter the router’s WAN IP address.

My Subnet Mask

  Enter the router’s WAN subnet IP address.

Gateway IP Address

  Enter the router’s WAN gateway IP address.

PPTP Settings

Login

  Enter the username assigned by your ISP.

Password:

 Enter the password assigned by your ISP.

Service IP Address:

 Enter the PPTP server IP address provided by your ISP. 

Connection ID:

 Enter the connection ID provided by your ISP (optional).

MTU 

 Enter the maximum transmission unit (MTU). The MTU specifies the largest 

packet size (Default: 1462) permitted for an internet transmission. The MTU size 
can be set between 512 and 1492.

Type 

 Configure the connection type between the router and the ISP. Choose 

between 

Keep Connection

, 

Automatic Connection

 or 

Manual 

Connection

.

Idle Timeout

  Configure the maximum amount of time, in minutes, allowed for 

inactive Internet connection. The Internet connection will be dropped when the 
maximum idle time is reached. Valid values are between one and one thousand.

Click 

Apply

 to save the settings or 

Cancel

 to discard changes.

Summary of Contents for X-TRA RANGE ERB150H











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands