EnGenius X-TRA RANGE ERB150H User Manual Download

Page: 122 / 138

ASIC

ETWORK

ETTINGS

IRMWARE

6-71

6.5.3 Firmware

Firmware is system software that operates and allows the administrator to interact with the router.

Upgrading Firmware

WARNING!

Upgrading firmware through a wireless connection is not recommended. Firmware upgrading must be performed while connected
to an Ethernet (LAN port) with all other clients disconnected.

To update the firmware version, follow these steps:

1. Download the appropriate firmware approved by EnGenius Net-

works from an approved web site.

2. Click

Choose File

3. Browse the file system and select the firmware file.

4. Click

Apply

Click

Apply

to save the settings or

Cancel

to discard changes.

Summary of Contents for X-TRA RANGE ERB150H











































































































































Search results

Summary of Contents for X-TRA RANGE ERB150H

Reviews:

Related manuals for X-TRA RANGE ERB150H

Brands by name

Popular brands

EnGenius X-TRA RANGE ERB150H, User Manual

Search results

Summary of Contents for X-TRA RANGE ERB150H

Reviews:

Related manuals for X-TRA RANGE ERB150H

Brands by name

Popular brands