EnGenius X-TRA RANGE ERB150H User Manual Download

Page: 27 / 138

ENIUS

UICK

TART

ONNECTING

THE

ABLES

3-3

3.1 Connecting the Cables

CAUTION!

NPLUG

ALL

PERIPHERALS

AND

THE

ADAPTER

BEFORE

STARTING

WITH

THIS

PROCEDURE

1. Connect the adapter cable to an electrical outlet.

Note:

The Power LED lights up to show the device is active.

2. If the ERB300H/ERB150H is acting as a client bridge, con-

nect media entertainment devices, a maximum of four, to the
LAN ports. Plug one end of an Ethernet cable into the LAN
port on the back panel of the device. Plug the other end of
the cable into the Ethernet port of the computer.

Note:

Make sure the network cables and power adapter are firmly con-
nected.

Summary of Contents for X-TRA RANGE ERB150H











































































































































Search results

Summary of Contents for X-TRA RANGE ERB150H

Reviews:

Related manuals for X-TRA RANGE ERB150H

Brands by name

Popular brands

EnGenius X-TRA RANGE ERB150H, User Manual

Search results

Summary of Contents for X-TRA RANGE ERB150H

Reviews:

Related manuals for X-TRA RANGE ERB150H

Brands by name

Popular brands