EnGenius X-TRA RANGE ERB150H, User Manual

Page: 35 / 138

I
NSTALLATION
S
ETUP
W
IZARD
U
SING THE
ERB300H/ERB150H
AS A
M
EDIA
E
NTERTAINMENT
B
RIDGE
4-7
Note:
The first time the device connects to a router in CB mode
it becomes a DHCP client and automatically configures its
subnet to that of the host network.
To complete the procedure, select media entertainment
devices, a maximum of four, and connect each device to a LAN
port on the ERB300H/ERB150H.
The ERB300H/ERB150H is successfully setup as a client
bridge to the router and is ready to stream media entertainment
applications.
Note:
When the ERB300H/ERB150H connects via Wi-Fi to a
remote router under bridge or repeater mode, the
device’s IP address changes to the router’s DHCP subnet
address. However, it is not possible to access the device
using the subnet IP address nor can a static IP address
be assigned in the traditional manner.
A work-around is available by following one of these two
procedures:

Enter the model name of the device in a web browser’s
address bar. For example, enter http://erb300h/ to con-
nect to the ERB300H or http://erb150h/ to connect to
the ERB150H.

The default management IP address of the device is
192.168.1.250. To connect to the device over a LAN,
the LAN’s subnet IP address must be 192.168.1.xxx.
Otherwise directly connect a PC to the device.
Manually configure a PC’s IP address to 192.168.1.xxx
and enter 192.168.1.250 in a web browser’s address
bar.