~43~
3. After the displayed number chosen, press the
key to call back.
Battery Recharge and Replacement
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-progress on hold.
3. Battery talk time and standby time vary depending on the talk/standby pattern
and the operating distance. Putting the handset back to charger cradle as
often as possible is recommended for best performance.
Use only
manufacturer provided battery and charger!
~44~
Programming Mode in Walkie-Talkie
Channel :
1
2
10
End/PTT
To save and exit
Frequency :
1
2
10
End/PTT
To save and exit
0
2
10
End/PTT
To save and exit
Up/Down or number
to select Channel 1~5
Up/Down or numbers
To select Frequency
number 1~56
Up/Down or numbers
To select Code 0~121
MODE
MODE
2
10
End/PTT
To save and exit
Mic. Gain:
2
1 - 3
MODE
MODE
Up/Down or number
To select microphone gain
3= High sensitivity
2= Medium sensitivity (default)
1= Low sensitivity, for noise
enviornments
2
10
VOX :
Off
End/PTT
To save and exit
Up/Down
To select VOX sensitivity
Off = Deactivate VOX (default)
High = High sensitivity
Medium = Medium sensitivity
Low = Low sensitivity, for noise
enviornments
1
FREQ
MODE
2
10
Scan Cannel
Off
End/PTT
To save and exit
Up/Down
To select the channel to be scan
Off = Deactivate scan (default)
1
Right soft key
To activate/deactivate the scan action
Code :
5
2
10
End/PTT
To save and exit
Up/Down or numbers
To select 1~5 available
channels
MODE
Total CH:
Compander :
On
2
10
End/PTT
To save and exit
Squelch Level
1
2
10
End/PTT
To save and exit
MODE
MODE
MODE
A
A
1-15
S
S
Up/Down
To activate compander
Off = Deactivate compander
(default)
Up/Down or number
To select squelch level
1= minimum level (default)
Each step is to increase 3dB.
15 = tight upper bound
