~39~
Redial
1. Press
REDIAL
(Left) soft key.
2. The LCD shows the last phone number dialed. To dial this number, press
DIAL
(Left) soft key.
3. Use
or
Arrow Key to scroll through the last 10 phone numbers
dialed. Select and press
DIAL
soft key.
[Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers
dialed log.
Receiving a Telephone Call
1. When an incoming call arrives, the ringer will ring or vibrate unless the ringer
has been turned off.
2. If the handset is on the charger cradle (ringer will be temporarily switched to
“Ring” if it has been set to “Vibrate”), lift the handset and start conversation.
3. If the handset is not on the cradle, press any key (except
, and the Silent
soft key) to answer.
4.
During the call, press the
key, the speakerphone is active.
Notes:
1.
You can press
SILENT
(Left) soft key if you choose to ignore
the call. Unlike turning off the ringer (from the handset
menu), the
SILENT
key operation is valid only for the current
call.
2.
If Caller ID service is available, the LCD will display the
incoming call information. If the LCD shows “Private” or
“Unknown”, the caller’s information may have been blocked
by the caller or the originating phone company.
Receiving an Intercom Call
1. When an intercom call arrives, the ringer will ring or vibrate unless the ringer
has been turned off. Press
to answer the intercom call.
~40~
2. If the handset is on the charger cradle (ringer will be temporarily switched to
“Ring” if it has been set to “Vibrate”), lift the handset and start conversation.
3. If the handset is not on the cradle, press any key (except
, and the
SILENT
soft key) to answer.
4.
During the call, press the
key, the speakerphone is active.
Notes:
1.
The LCD displays the caller’s Handset ID.
2.
You can press the
SILENT
(Left) soft key if you choose to ignore
the call. Unlike turning off the ringer the
SILENT
key operation is
valid only for the current call.
Ending a Call
To end a telephone or intercom call, press
key or place handset into charger
cradle.
Adjusting Voice Volume in Phone mode
1. Voice volume can only be adjusted during a call. It is
used for receiver (earpiece) and speaker in phone.
2. There are 6 levels of volume selections. Default = 3. Use
or
arrow key to adjust
3. The new setting remains effective for all future calls
until changed.
Adjusting Volume in Walkie-Talkie
1. The volume from speaker in walkie-talkie can only be
adjusted by On-Off/Volume knob.
2. Rotate knob clockwise to increase and counterclockwise
to decrease volume
10
00:00:10
Volume:4
MUTE HOLD
10
1
DuraFon PRO
UNHOLD OPTION
