~19~
c. Dial from display
d. During the stand-by mode, you can enter the phone book by pressing
scrolling key
e. Phone book transfer via air
i.
Transfer specific phonebook to one handset or all registered handsets
ii.
Transfer all phonebooks to one handset or all registered handsets
14. Key tone
a. Three-level key-tone volume selections (high/low/off)
b. Four key-tone type selections
15. Call timers
Display call time duration for current call during and immediately after the call
16. Call Transfer (Register to PRO base)
a. Direct Transfer: transfer a telephone call to another handset without
announcement.
17. Programmable PBX Options:
a. Allow user to pre-program the most frequently used PBX feature
along with its feature code into DuraFon which is adjunct to the PBX
system.
b. Up to 9 entries can be saved.
c. Once the feature and feature codes being programmed, you can
quick perform those functions during the call by pressing
OPTION
soft key.
18. Base Selection (Register to PRO base)
When enable from the handset menu, a handset user can manually select the
base which is the nearest one with user before making an outgoing call.
19. Repeater Operation (Register to PRO base)
In order to get better range performance for handset to handset calls(intercom
and broadcast), install a repeater and make the calls via repeater is able to
extend the range of handset to handset calls.
Administrator Features (Register to PRO base)
Handsets 10 and 11 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menu
selections. No password is required.
~20~
1. Supports both DTMF and Pulse dialing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11 ), press
MENU
-
9
–
1
–
enter base ID(00–07)-
1
to select Tone or Pulse dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
enter base ID(00–07)-
2
to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default=
300 ms
.
c. The default value (
300 ms
) works in most areas. Changing this setting
may result in Flash function not working. Change only when you are
certain the new value will work.
3. Call Transfer to PBX Extension(For DuraFon PRO only)
a. When the DuraFon PRO is installed behind a PBX system, you can pre-
program the feature code of call transfer function.
b. Need to adjust the Flash time to match your PBX setting.
Re: If loosing administrator handsets (handset 10 and 11), all settings must be
reset (reset the base and re-register all handsets).
