75
12.4
Port Triggering
If you use Internet applications which use non-standard
connections or port numbers, you may find that they do
not function correctly because they are blocked by the
Wireless Router's firewall. Port Triggering will be
required for these applications to work.
Port Triggering
Enable Port Triggering
Check this box to enable the Port Trigger feature.
Popular Applications
This is a list of some common applications with preset settings.
Select the application and click
Add
to automatically enter the settings.
Trigger Port
This is the outgoing (outbound) port numbers for this application.
Trigger Type
Select whether the application uses TCP, UDP or Both types of protocols for outbound
transmissions.
Forwarded Port
These are the inbound (incoming) ports for this application.
Public Type
Select whether the application uses TCP, UDP or Both types of protocols for inbound transmissions.
Summary of Contents for ERB9260
