46
WEP Encryption:
WEP Encryption
Authentication Type
Please ensure that your wireless clients use the same authentication type.
Key Length
Select the desired option, and ensure the wireless clients use the same setting.
64 Bit
- data is encrypted, using the default key, before being transmitted. You
must enter at least the default key. For 64 Bit Encryption, the key size is 10 chars in
HEX (0~9 and A~F).
128 Bit -
data is encrypted, using the default key, before being transmitted. You
must enter at least the default key. For 128 Bit Encryption, the key size is 26 chars
in HEX (0~9 and A~F).
Default Key
Select the key you wish to be the default. Transmitted data is ALWAYS encrypted using
the Default Key; the other Keys are for decryption only.
You must enter a
Key Value
for the
Default Key
.
Encryption Key #
Enter the key value or values you wish to use. Only the Key selected as Default is
required. The others are optional.
Summary of Contents for ERB9260
