EnGenius ERB9260 User Manual Download Page 92

Page: 92 / 104

14.2

Dynamic DNS (DDNS) (Client Router mode)

This free service is very useful when combined with the

Virtual Server

(

Port Forwarding

) feature. It allows Internet

users to connect to your Virtual Servers using a URL, rather
than an IP Address.

This also solves the problem of having a dynamic IP
address. With a dynamic IP address, your IP address may
change whenever you connect, which makes it difficult to
connect to you.

Note

: Only in Client Router mode.

DDNS Services work as follows:

You must register for the service at one of the listed DDNS Service providers.

After registration, follow the Service provider's procedure to obtain your desired Domain name.

Enter your DDNS data on the device’s DDNS screen, and enable the DDNS feature.

The Wireless Router will automatically ensure that your current IP Address is recorded at the DDNS service provider's Domain Name Server.

From the Internet, users will be able to connect to your Virtual Servers (or DMZ PC) using your Domain name, as shown on this screen.

Dynamic DNS

Tick this box to Enable the DDNS feature.

Server Address

Select the list of Dynamic DNS homes you would like to use from this list.

Username / Password

Enter the Username and Password of your DDNS account.

Summary of Contents for ERB9260









































































































Search results

Summary of Contents for ERB9260

Reviews:

Related manuals for ERB9260

Brands by name

Popular brands

EnGenius ERB9260, User Manual

Search results

Summary of Contents for ERB9260

Reviews:

Related manuals for ERB9260

Brands by name

Popular brands