19
programmed to be added automatically in front of the dialed
number when dialing from call logs, phonebook, and dial-and-send
dialing.
10. Call Hold(For DuraFon PRO
only
)
a. Places call on hold
b. Battery Hot Swap: Change battery while call is on hold.
11. Mute
12. Phonebook
a. 90 entries, each stores a phone number or handset ID (up to
28-digit) and name (up to14-character)
b. Alphabetically sorted display and searched by letter
c.
Dial from display
d. During the stand-by mode, you can enter the phonebook by
pressing
or
scrolling key
e. Phone book transfer via air
i.
Transfer specific phonebook to one handset or all
registered handsets
ii.
Transfer all phonebooks to one handset or all registered
handsets
Re:For DuraWalkie, it can only store 2-digit handset ID(or Group ID).
13. Key Tone
a. Three key-tone volume selections (high/low/off)
b. Four key-tone type selections
14. Call Timer(For DuraFon PRO
only
)
a. Display call time duration for current call during and
immediately after the call
15. Call Transfer
a. Direct Transfer: transfer a telephone call to another handset
without announcement.
16. PBX option transfer(For DuraFon PRO
only
)
a. PBX transfer via air
b. Transfer specific PBX option to one handset or all registered
handsets
c.
Transfer all PBX options to one handset or all registered
20
handsets
17. Base Selection(For DuraFon PRO only)
When enable from the handset menu, a handset user can manually
select the base which is the nearest one with user before making an
outgoing call.
18. Repeater Operation
In order to get better range performance for handset to handset
calls(intercom and broadcast), install a repeater and make the calls
via repeater is able to extend the range of handset to handset calls.
Administrator Features (Register to PRO base)
Handsets 10 and 11 are designated administrators. Both have the same
authority to perform base station administrative functions from their
handset menu selections. No password is required.
1. Supports both DTMF and Pulse dialing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11 ), press
MENU
-
9
–
1
–enter base ID(00–07)-
1
to select Tone or Pulse
dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO
only)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
- enter base ID(00–07)-
2
to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default=
300 ms
.
c. The default value (
300 ms
) works in most areas. Changing this
setting may result in Flash function not working. Change only
when you are certain the new value will work.
3. Call Transfer to PBX Extension(For DuraFon PRO only)
a. When the DuraFon PRO is installed behind a PBX system, you
can pre-program the feature code of call transfer function.
b. Need to adjust the Flash time to match your PBX setting.
Re: If loosing administrator handsets (handset 10 and 11), all
settings must be reset (reset the base and re-register all
handsets).
