41
with the 3-digit area code followed by the 7-digit telephone
number. If the area code is unnecessary for calling back, you can
follow below rule to adjust the calling back number:
a. Press
FORMAT
key once, the 3-digit area code will be removed.
b. Press
FORMAT
key twice, “1” will be added in front of the
displayed number.
c. Press
FORMAT
key three times, it will loop back original
displayed number.
Re:The CID default is 10 digits, when press
FORMAT
key, it will be 7-
digit –> 11-digit –> 10-digit in circle.
3.
After the displayed number chosen, press the
key to call back.
Battery Recharge and Replacement
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. A decrease in coverage is experienced.
2. You can replace the handset battery after placing the call-in-
progress on hold.
3. Battery talk time and standby time vary depending on the
talk/standby pattern and the operating distance. Returning the
handset back to the charging cradle as often as possible is
recommended for best performance.
Use only manufacturer
provided battery and charger!
42
Advanced Operations
Handset Registration
1. If your handset is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If the Handset ID reads “00,” that means it is a new handset or the
ID has been erased. You need to register the handset with the base
station. In certain situations, you may want to change a handset’s ID.
For example, you want to change a particular handset from a user to
an administrator (ID 10 or 11), or vice versa. Or in some rare
occasions, you find another handset having the same Handset ID.
3. Registration:
a. Press MENU-6 to enter the registration mode
b. Press and hold the base’s Registration (REG) button for 2
seconds until 4 LEDs light up.
c.
Press handset key “1”, this completes the registration process.
The base station will assign a handset ID between 10 and 99.
The assigned ID will be displayed on the handset LCD,
indicating successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID 10 and 11,
which gives them administrator privileges.
Re : Base 00 is a primary base. All handsets must register to Base 00.
4. De-registration:
a. You can de-register a handset from a base. De-registration will
reset the Handset ID to 00, erase the system security code, and
free up the old ID for future registration.
b. After deregistration, the handset will not be able to use the
base to make or receive phone calls, nor can it use the intercom
to reach other handsets.
c. Press handset
MENU
(Right) soft key.
d. Press the handset number key
6
, this will enter the handset
registration menu.
e. Press and hold the base’s REG button for 2 seconds until 4 LEDs
come on
f.
Press the handset number key
2
, this completes the de-
registration process. Upon successful de-registration, the
