23
Additional Base Station Features
Broadcast
A. Broadcasting from Base to Handset
1. Broadcast to all handsets
a.
Press
key on the base station to intercom
all registered handsets.
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage.
c.
The Broadcast LED will light up
d.
Press the
key again and return to IDLE
mode
B. Broadcasting from Handset to Base
1. Broadcast to all Bases (DuraFon PSL-BU)
a.
Press and hold the
key on the handset to
broadcast all handsets and bases.
b. Start to speak the message to be broadcasted once
you hear the “beep” sound; the speakerphone of
the base will be opened up.
c.
The Broadcast LED on the bases will light up
d.
Press the
key again and return to IDLE
mode
Intercom Call
A. Intercom/2-Way from Base to Handset
1. Press
key on the base station to intercom all
registered handsets. The first handset to answer will
establish a voice link with the base.
2. The INTERCOM LED will flash until a handset responds.
3. The base unit will page for 15 seconds, then terminate the page if
no handset responds.
4. Before a handset answers, the INTERCOM can be cancelled from the
11
From BASE 00
Volume: 2
SILENT
11
From BASE 00
Volume: 2
SILENT
11
Incoming page
From Ext#90
SILENT
24
base by pressing
again. However, once a handset answers,
only the answering handset can end the call.
Notes:
1.
Due to for comply with existing DuraFon-HC, the display
does not match the behavior. For example, the intercom
call from base to handset, it displays “from Ext #90” instead
of “from Base xx”.
2.
No support line detection feature in DuraFon PSL-BU base.
Even you set “Line Det” from an administrator handset
(Handset 10 or 11) via pressing MENU- 9 – 1 –enter base
ID(00–07)- 3 to enable Line Det.
3.
In DuraFon PSL-BU base, no support “Auto Attendant”.
4.
In DuraFon PSL-BU base, no support “3-way Conference”.
5.
In DuraFon PSL-BU base, no support “Announced call
transfer”
6.
In DuraFon PSL-BU base, no support “ call waiting” from
other telephone lines, due to it is only single line.
7.
In DuraFon PSL-BU base, no support “Broadcast through
PBX”
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the same
authority to perform base station administrative functions from their
handset menu selections. No password is required.
1. Supports both DTMF and Pulse dialing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11 ), press
MENU
-
9
–
1
–enter base ID(00–07)-
1
to select Tone or Pulse
dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO
only)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
2
to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 6
00 ms
.
c. The default value (
600 ms
) works in most areas. Changing this
setting may result in Flash function not working. Change only
