Battery LED Indicators
Three LED indicators indicate the condition of the battery bank.
G
REEN
means the batteries have an adequate charge at that
time. It does not always mean they are full. If the FLEXnet DC
battery monitor (FN-DC) is installed, this means the batteries are
80% State of Charge (SOC).
Y
ELLOW
means the batteries are somewhat discharged. If the
FN-DC is installed, this means the battery SOC is between 60%
and 70%.
R
ED
means the batteries are greatly discharged and may require
attention. If the FN-DC is installed, this means the battery SOC
is less than 60%. This indicator may be accompanied by a
Low Battery V
error and the
EVENTS
indicator. (See page 5.)
BATTERY STATUS
INVERTER
GEN
CHARGER
EVENTS
FAVORITE
AC INPUT
1.5
kW
0.1
kW
115
V
1.5
kW
28.5
V
0.00
kW
0.0
kW
G
G
OutBack Power
1.5 kW
1.5 kW
115
V
1.5
kW
85%
28.5
V
System
OK
0.00
kW
0.0 kW
G
G
Battery Status Indicators
NOTES:
Gaps in the table (higher-voltage units) are due to the resolution of the inverter’s DC meter.
These voltage settings are not the same as the inverter’s
Low Battery Cut-Out
voltage. The Battery LED settings cannot be changed.
Voltages higher than shown in the G
REEN
row usually means that the batteries are charging.
Displays
Power Up
Device
Identification
Port
Assignment
Home
Screen
When the MATE3s is plugged into a powered OutBack product, it immediately powers up and cycles through
the startup screens. It will proceed to locate and identify the attached components and the ports they occupy
on the HUB. It will then stop on the “Home” screen.
R
ED
11.4 Vdc or lower
22.8 Vdc or lower
34.2 Vdc or lower
45.6 Vdc or higher
Low
Y
ELLOW
11.5 to 12.4 Vdc
23.0 to 24.8 Vdc
34.5 to 37.2 Vdc
46.0 to 49.6 Vdc
Usable
G
REEN
12.5 Vdc or higher
25.0 Vdc or higher
37.5 Vdc or higher
50.0 Vdc or higher
Acceptable
24 Vdc Unit
± 0.2 Vdc
Color
12 Vdc Unit
36 Vdc Unit
± 0.3 Vdc
48 Vdc Unit
± 0.4 Vdc
Battery
Status
Page 22
900-0124-01-02 Rev B
©2017 OutBack Power. All Rights Reserved.
Page 3
LED Indicators
Specifications
MATE3s
Mechanical Specifications
Dimensions (H × W × L)
7½ × 7 1/16 × 1
⅝
" (19 × 17.9 × 4.2 cm)
Shipping Dimensions (H × W × D)
3¼ × 9 × 13½” (33.7 × 22.9 × 34.3 cm)
Weight
1.4 lb (0.64 kg)
Shipping Weight
3.0 lb (1.36 kg)
Ports
RJ45 for proprietary OutBack HUB communication (×1)
RJ45 Ethernet port (×1)
Nonvolatile Memory
64 Mb (for internal data logs and MATE3s configuration settings)
Interface Display
Liquid Crystal Display (LCD)
Control Keypad
4 soft keys, 6 hot keys
4 navigation keys, 1 control wheel with Enter button
Status Indicators
9 LED indicators
Battery (for real-time clock and internal memory)
CR2032
Communication Protocol
Proprietary OutBack network
Interconnection Cabling Standard
Category 5 OutBack proprietary
PC Interface
Category 5
Environmental Rating
Indoor only
Warranty
5-year standard
Regulatory Specifications
Emissions
Indoor only
Compliance
CE Conformance European EN 55022 Class B
Firmware Revision
This manual applies to MATE3s System Display and Controllers with a firmware versi
on of 001.004.003
or higher.
