Energie FF Evi 10, Installation And Instruction Manual

Page: 33 / 59

ENERGIE Page | 31
A09
A09 differential
R03 Heating Setpoint
R22 Second Setpoint (only heating mode)
17.11 Configure HP with two different set points (CH and
DHW)
To configure the Heat Pump operation with two different set points, ex.
45 °C for the central heating and 55 °C for DHW, must perform the
following procedures:
1. Physically enable the second set point (DHW), move the wire 8 for the
terminal connection 25 .
2.
Go to the controller “µC²SE” and following the next steps:
a) Press simultaneously the " " and " " keys during 5 s;
b) Set the password (11) via " " and " " keys and confirm with "
" key;