Energie FF Evi 10, Installation And Instruction Manual

Page: 11 / 59

ENERGIE Page | 9
In so doing, the electrical energy is used to raise the heat of the
environment to a higher temperature level.
Due to the fact that the heat energy extracted from the air is transferred to
the heating water, this type of appliance is referred to as an air to water heat
pump.
The air to water heat pump consists of the following main components:
Evaporator, fan, expansion valve, low-noise scroll compressor, condenser
and the control unit.
In the case of low ambient temperatures, air humidity may accumulate on
the evaporator in the form of frost, impairing the heat transfer. The
evaporator is automatically defrosted by the heat pump, as required, with
the possibility of vapor plumes forming at the air outlet.
8
8
.
.
D
D
e
e
v
v
i
i
c
c
e
e
d
d
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
The running range of the heat pump:
Heating:

the ambient temperature from -25
o
C to 43
o
C;

inlet water temperature from 55
o
C to 15
o
C.
Cooling:

the ambient temperature from 21
o
C to 43
o
C;

Inlet water temperature from 8
o
C to 28
o
C.
Compared with oil boiler, gas boiler and electrical heater, heat pump is
the best solution with high efficiency, safety and environment protect.
This high temperature air source heat pump use advanced heating
technology and intelligent control system, to produce hot water at more
than 60
℃
. So it can work with the floor heating pipe, the fan coil or the
radiator, and replace the boiler directly.
In addition, the high temperature heat pump can be used to provide hot
water for sanitary use, like kitchen, shower, etc.
9
9
.
.
T
T
r
r
a
a
n
n
s
s
p
p
o
o
r
r
t
t
The Heat Pump is packed in a cardboard box without a bottom, and is
secured to a wood pallet with plastic strapping.
When the heat pump is transported please keep the unit stand up,
otherwise the inner parts of the device may be damaged.