Energie FF Evi 10, Installation And Instruction Manual

Page: 31 / 59

ENERGIE Page | 29
g) With " " or " " keys go to the parameter r03 (heating mode set
point) , enter with " " key and set the new set point, save the
value with " " key,
h) With " " or " " keys go to the parameter r04 (heating mode
differential) , enter with " " key and set the new set point, save
the value with " " key,
i) To return to the previous menu press one time " " key and two
times to menu exit.
ATTENTION
The parameters modified without confirmation via the “ ” key go
back to the previous value;
17.9 Configure/ change backup set point
Parameter Description
A08
Backup setpoint
A09 A08 differential
A16 Backup delay
1.
Go to the controller “µC²SE” and following the next steps:
a) Press simultaneously the " " and " " keys during 5 s;
b) Set the password (66) via " " or " " keys and confirm with " "
key;
c) With " " or " " keys select the menu parameter and
enter with " " key;
d) With " " or " " keys select the parameter and enter with "
". Key;
e) With " " or " " keys go to the parameter A08 (Backup set
point) , enter with " " key and set the new set point, save the
value with " " key,
f) With " " or " " keys go to the parameter A09 (Backup
differential) , enter with " " key and set the new set point, save
the value with " " key,