Operating the ESE 607 / 957 DBG (ES) DIN
Transporting the generator
34
ESE 607 / 957 DBG (ES) DIN
Issued: February 2013
4
Operating the ESE 607 / 957 DBG (ES) DIN
The operation of the generator is described in this section.
4.1
Transporting the generator
Proceed as follows to transport the generator.
Requirements
The following requirements must be ful
fi
lled:
●
the generator is turned off
●
the generator has cooled down
●
The installed fuel valve is in the “OFF” position
●
the fuelling device (a special accessory see 3.1.4.2) is
disconnected
●
exhaust hose (a special accessory see 3.1.4.2) is not
attached
●
at least one person per carrying handle
WARNING!
A slipping or falling device can crush hands or feet.
●
take the weight into account — about 115 / 145 kg.
●
carry the generator using at least one person per carrying
handle.
●
only lift the generator by the carrying handles.
●
lift / lower the generator evenly.
●
walk slowly.
Carrying the device
1. Unfold carrying handles.
2. Lift generator evenly.
3. Carry generator to place of use.
4. Lower generator evenly.
5. Fold carrying handles.
The generator has been carried to its work site.