General safety regulations
General safety warnings
Issued: February 2013
ESE 607 / 957 DBG (ES) DIN
25
Maintenance and repair work
Operating personnel may only carry out the maintenance or
repair work described in these operating instructions.
All other maintenance or repair tasks may only be carried out by
specially trained and authorised specialists.
Always remove the ignition key and the spark plug sockets
before beginning maintenance and/or repair work.
The maintenance intervals speci
fi
ed in these operating
instructions must be observed.
It is prohibited to service the generator during operation.
It is prohibited to service the generator whilst it is still hot.
Laying up
The generator should be laid up if it is not required for longer
than 30 days.
Store the generator in a dry and locked room.
Use a petrol additive to prevent resinous residues in the fuel
system.
Documentation
A copy of these operating instructions must always be kept in the
generator’s manual compartment.
The operating instructions and the maintenance instructions for
the engine (Briggs & Stratton Corporation) are integral parts of
this instruction manual.
Environmental protection
The packaging material must be recycled according to the
environmental protection regulations applicable at the place of
work.
The workplace must be protected against contamination by
leaking operating
fl
uids.
Used or leftover fuels and lubricants must be recycled according
to the environmental regulations applicable at the place of use.