Proline Promag L 400 HART
Basic safety instructions
Hauser
9
Possible burn hazard due to fluid temperatures!
►
For elevated fluid temperature, ensure protection against contact to prevent burns.
2.3
Workplace safety
For work on and with the device:
►
Wear the required personal protective equipment according to federal/national regulations.
For welding work on the piping:
►
Do not ground the welding unit via the measuring device.
2.4
Operational safety
Risk of injury.
►
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable dangers.
►
If, despite this, modifications are required, consult with Hauser.
Repair
To ensure continued operational safety and reliability,
►
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Hauser only.
Environmental requirements
If a plastic transmitter housing is permanently exposed to certain steam and air mixtures, this can
damage the housing.
►
If you are unsure, please contact your Hauser Sales Center for clarification.
►
If used in an approval-related area, observe the information on the nameplate.
2.5
Product safety
This measuring device is designed in accordance with good engineering practice to meet state-of-
the-art safety requirements, has been tested, and left the factory in a condition in which they are
safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC directives
listed in the device-specific EC Declaration of Conformity. Hauser confirms this by affixing
the CE mark to the device.
