Endress+Hauser Proline Cubemass C 300, Operating Instructions Manual

Page: 77 / 216

Proline Cubemass C 300 Commissioning
Hauser 77
10 Commissioning
10.1 Function check
Before commissioning the measuring device:
‣
Make sure that the post-installation and post-connection checks have been performed.
• Checklist for "Post-mounting check" →  29
• Checklist for "Post-connection check" →  41
10.2 Switching on the measuring device
‣
After a successful function check, switch on the measuring device.
 After a successful startup, the local display switches automatically from the startup
display to the operational display.
If nothing appears on the local display or a diagnostic message is displayed, refer to
the section on "Diagnostics and troubleshooting" →  148.
10.3 Setting the operating language
Factory setting: English or ordered local language
X X X X X X X X X
20.50
Operation
Setup
Main menu 0104-1
Display language
English
Español
Français
Display language
English
Deutsch
Ã
0104-1
Ã
Español
Français
Display language
English
Deutsch
0104-1
Betrieb
Setup
Hauptmenü
Sprache
Deutsch
0104-1
XX XX
1.
2.
3.
4.
A0029420
 30 Taking the example of the local display
10.4 Configuring the measuring device
• The Setup menu with its guided wizards contains all the parameters needed for standard
operation.
• Navigation to the Setup menu