Commissioning
Proline Cubemass C 100 HART
66
Hauser
Navigation
"Setup" menu → Output conditioning
Structure of the submenu for output conditioning
Output conditioning
→
Assign current output
Damping output
Measuring mode output
Assign frequency output
Damping output
Measuring mode output
Assign pulse output
Measuring mode output
Operating mode totalizer
Parameter overview with brief description
Parameter
Description
Selection / User entry
Factory setting
Assign current output
Select process variable for current output.
• Off
• Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
• Carrier mass flow
• Density
• Reference density
• Concentration
• Dynamic viscosity
• Kinematic viscosity
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Carrier pipe temperature
• Electronic temperature
• Oscillation frequency 0
• Oscillation frequency 1
• Oscillation amplitude 0
• Oscillation amplitude 1
• Frequency fluctuation 0
• Frequency fluctuation 1
• Oscillation damping 0
• Oscillation damping 1
• Tube damping fluctuation 0
• Tube damping fluctuation 1
• Signal asymmetry
• Exciter current 0
• Exciter current 1
• Sensor integrity
Mass flow
Damping output
Set reaction time for output signal to
fluctuations in the measured value.
0 to 999.9 s
1 s
Summary of Contents for Proline Cubemass C 100 HART
Page 126: ...www addresses endress com...
