Endress+Hauser Proline Cubemass C 100 HART, Operating Instructions Manual

Page: 51 / 126

Proline Cubemass C 100 HART System integration
Hauser 51
Min. update period →  52
Max. update period →  52
Parameter overview with brief description
Parameter Description Selection / User entry Factory setting
Burst mode 1 to n Activate the HART burst mode for burst
message X. • Off
• On Off
Burst command 1 to n Select the HART command that is sent to the
HART master. • Command 1
• Command 2
• Command 3
• Command 9
• Command 33
• Command 48 Command 2
Burst variable 0 For HART command 9 and 33: select the
HART device variable or the process variable. • Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
*
• Carrier mass flow
*
• Density
• Reference density
• Concentration
*
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Sensor integrity
• Pressure
• HART input
• Percent of range
• Measured current
• Primary variable (PV)
• Secondary variable (SV)
• Tertiary variable (TV)
• Quaternary variable (QV)
• Not used
Volume flow
Burst variable 1 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 2 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 3 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 4 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 5 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 6 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 7 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst trigger mode Select the event that triggers burst message
X. • Continuous
• Window
• Rising
• Falling
• On change Continuous