Commissioning
Proline Cubemass C 100 HART
60
Hauser
Frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
Structure of the submenu for the frequency output
Pulse/frequency/switch output
→
Operating mode
Assign frequency output
Minimum frequency value
Maximum frequency value
Measuring value at minimum frequency
Measuring value at maximum frequency
Failure mode
Failure frequency
Invert output signal
Parameter overview with brief description
Parameter
Description
Selection / User entry
Factory setting
Operating mode
Define the output as a pulse, frequency or
switch output.
• Pulse
• Frequency
• Switch
Pulse
Assign frequency output
Select process variable for frequency output. • Off
• Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
• Carrier mass flow
• Density
• Reference density
• Concentration
• Dynamic viscosity
• Kinematic viscosity
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Carrier pipe temperature
• Electronic temperature
• Oscillation frequency 0
• Oscillation frequency 1
• Frequency fluctuation 0
• Frequency fluctuation 1
• Oscillation amplitude 0
• Oscillation amplitude 1
• Oscillation damping 0
• Oscillation damping 1
• Tube damping fluctuation 0
• Tube damping fluctuation 1
• Signal asymmetry
• Exciter current 0
• Exciter current 1
Off
Summary of Contents for Proline Cubemass C 100 HART
Page 126: ...www addresses endress com...
