Installation
Micropilot S FMR540 4 to 20 mA HART
20
Hauser
Sensor alignment tool for alignment device
L00-FMR540xx-00-00-00-yy-008
A sensor alignment tool (a) is recommended to be used at
the time of installation for FMR540 with alignment device.
Alignmen procedure
Note!
This procedure is only applicable to the sensors purchased
with talignment device (b). To carry out this procedure
requires an accessory from Hauser, sensor align-
ment tool (a) for Micropilot S FMR540.
Before starting this procedure, please observe Micropilot S
FMR540 has been mounted on the tank in proper position
and all flange bolts are tightened.
Tools: 90 mm open wrench
Accessory Package contains:
Sensor alignment tool (part no. 52026756)
Description of procedure "Sensor Alignment using Sensor
alignment tool"
(KA00274F/00/A2 part no. 52027425)
1.
Loosen the nut (b), so that the FMR540 can tilt
smoothly.
L00-FMR540xx-00-00-00-yy-009
2.
Observe the sensor can smoothly tilt its position.
The nut should not be too loose.
Tilt the Micropilot S to approximately vertical to the
medium surface (d) or horizontal plane.
a
b
c
M
a
d
e
i
n
G
e
rm
a
n
y
M
a
u
lb
u
rg
Made in Ger
m
an
y Maulb
u
rg
IP 65
Mes
sbe
reic
h
Me
asu
ring
ran
ge
Messbereich
Measur
ing r
ange
U 1
6...3
6 V
D
C
4...
20 m
A
U 16...36
V DC
4...20 mA
ma
x. 2
0 m
max.
20 m
T
>70
°C :
A
t >
85
°C
T
>70°C :
A
t >85°C
Ord
er C
ode
:
Ser.-
No.:
Order Code:
Ser
.-No
.:
SS+HA
USER
OPILO
T FMR
SS+HA
USER
OPILO
T FMR
d
90 °
90 °
±
15°
