Endress+Hauser Liquiline To Go CYM290, Operating Instructions Manual

Page: 13 / 64

13
Connecting a Sensor
The Liquiline To Go CYM290 provides a pH socket acc. to DIN 19262 for analog pH
sensors. Alternatively, you can connect a Memosens sensor for pH, conductivity or
oxygen measurement. The meter automatically recognizes a connected Memosens
sensor and accordingly selects the corresponding process variable.
Memosens is signaled in the display.
Note that only one sensor may be connected to the meter at a time.
Separate temperature probe
After power-on, a separate temperature probe is automatically recognized.
When you want to replace the temperature probe, you must switch off the meter
and then switch it on again.
Start-Up
Memosens sensors have a cable coupling, which allows convenient replacement
of sensors while the cable remains connected to the meter. The connecting cable is
connected to socket b (Memosens lab cable) or e.
Connections
a - Micro USB port
b - M8, 4 pins, for Memosens lab cable
c - Temperature probe GND
d - Temperature probe
e - pH socket acc. to DIN 19262 for analog
sensors
a b c d e