Gammapilot M FMG60 PROFIBUS PA
Accessories
Hauser
85
8.6.2
Application hints
Allowed
Preferred
A0018141
A
Level measurement, FMG60 without water jacket
B
Level measurement, FMG60 with water jacket
C
Level limit measurement, FMG60 without water jacket
D
Level limit measurement, FMG60 with water jacket
E
Such horizontal mounting not permitted
1
Retainer for pipe
80 mm (3.15 in)
2
Retainer for water cooling jacket ,
140 mm (5.51 in)
3
Retainer for pipe
102 mm (4.72 in)
4
Bracket
CAUTION
!
Consider while mounting the device
‣
The mounting device must be fitted in a way such that it can withstand the weight of the
Gammapilot M under all operating conditions to be expected.
‣
For a measuring length of 1600 mm (63 in) or more, two retainers (vertical) or three
retainers (horizontal) must be used.
‣
For vertical mounting usage of the bracket or a support unit fitted by the customer is
mandatory. Otherwise a sufficient stability and support of the Gammapilot M is not
ensured.
‣
For stability reasons the mounting version with the compartment housing pointing
upwards should only be used in exceptional cases (e.g. lack of space).
‣
To prevent damage of the detector tube, the maximum torque of the retainer screws is
6 Nm (4.42 lbf ft).
8.6.3
Ordering information
Detailed ordering information is available as follows:
• In the Product Configurator on the Hauser website: www.endress.com
➞
Select
country
➞
Instruments
➞
Select device
➞
Accessories for FMG60
• From your Hauser sales center: www.endress.com/worldwide
1
2
2
3
2
2
1
1
1
2
2
1
4
4
4
4
1
1
A
B
C
D
E
Product Configurator - the tool for individual product configuration
• Configuration data updated on a daily basis
• Depending on the device: Direct input of data specific to measuring point, such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic generation of order code with breakdown in PDF or Excel output format
• Possibility to order directly from the Hauser online shop
