Gammapilot M FMG60 PROFIBUS PA
Operation
Hauser
31
5.2
Display operation
5.2.1
Display and operating elements
The LCD module VU331 for displaying and operating is inside the remote display and
operating unit FHX40. The measured value can be read off through the FHX40 sight glass.
In order to operate the instrument, the FHX40 must be opened by removing the four screws.
A0018096
1
Gammapilot M
2
FHX40
3
Operating module VU331
Display and operating module VU331
A0018097
1
Operating keys
4
Function name
2
Bargraph
5
Parameter Identification number
3
Symbols
Display symbols
The following table describes the symbols that appear on the liquid crystal display:
1
2
3
EN
DR
E
SS
+ HA
US
E
R
E
+
–
1
2
3
4
5
Symbol
Meaning
ALARM_SYMBOL
This alarm symbol appears when the instrument is in an alarm state. If the symbol flashes, this
indicates a warning.
LOCK_SYMBOL
This lock symbol appears when the instrument is locked, i.e. if no input is possible.
COM_SYMBOL
This communication symbol appears when data transmission via HART, PROFIBUS PA or
FOUNDATION Fieldbus, for example, is in progress.
SIMULATION_SWITCH_ENABLE
This communication symbol appears when simulation in FOUNDATION Fieldbus is enabled via the
DIP switch.
