Specification
InnuPure C16
touch
68
11.2
Guidelines and standards
The InnuPure C16
touch
is protection class I. The casing is rated IP 20.
The InnuPure C16
touch
complies with the safety standards
DIN EN 61010-1
DIN EN 61010-2-081
InnuPure C16
touch
has been tested for radio interference resistance and radio inter-
ference emissions in accordance with DIN EN 61326-1:2013 and meets the require-
ments according to:
Interference immunity according to table 1 (normal environment) with tablet con-
trol
Interference immunity according to table 2 (industrial environment) with external
PC control
Interference emission according to class B for all operating variants
The InnuPure C16
touch
is designed and tested in accordance with standards meeting
the requirements of EC directives 2014/35/EU and 2014/30/EU. The device leaves
the manufacturer in a pristine and technically safe state. To maintain this condition
and to ensure safe operation, the operator must strictly observe the safety and operat-
ing instructions contained in this manual. For accessories which have also been sup-
plied, and system components from other manufacturers, their operating instructions
should be referred to.
The device contains substances subject to regulation (according to regulation "Man-
agement Methods for the Restriction of the Use of Hazardous Substances in Electrical
and Electronic Products"). Analytik Jena guarantees that the substances will not leak
within the next 25 years and, therefore, will not cause any environmental danger or
health risk within this period of time if the device is used as intended.
Protection class and
type of protection
Device safety
EMC compatibility
EC directives
Guidelines for China