Installation and commissioning
InnuPure C16
touch
22
For insertion of the sample tray, the lower front door opens automatically and soft-
ware-controlled. The drawer is ejected at the front of the device. The device door must
also be opened for cleaning and maintenance purposes and must therefore be added
to the dimensions.
The ventilation slits at the rear of the device must remain unobstructed to ensure air
circulation.
4.2
Connections and control elements
The mains connection, the fuse holder and the mains switch are located at the rear
side of the InnuPure C16
touch
.
Fig. 7
Rear connections and switches on the InnuPure C16 touch
1 Mains switch
2 Fuse holder
3 Mains connection
4 RS 232 interface (service only)
5 Rating plate
The rating plate is also attached to the rear of the device. The rating plate shows
among other information the serial number of the device and the electrical connection
data:
Manufacturer (with address)
Device type and model
Order number
Serial number
Electrical connection
Waste disposal symbol
Protection class of the housing