InnuPure C16
touch
Transport and storage
63
19.
Mount the two missing side panels.
20.
Close the transport box with the lid.
21.
Screw the tool required to remove the brackets on the
transport box.
9.1.2
Transport notes
Observe the safety instructions in chapter “Safety instructions, transport and installa-
tion” p. 9. Avoid the following during transport:
Impacts and vibrations
Risk of damage due to shock, impacts or vibrations!
Major temperature fluctuations
Risk of condensate build-up!
9.1.3
Moving the device in the laboratory
CAUTION
Unintentionally dropping the device poses a risk of injury and damage to the device!
Move the InnuPure C16
touch
with great care! Two persons are required to lift and
carry the device!
When moving the InnuPure C16
touch
in the laboratory observe the following:
1.
Switch off the tablet and the InnuPure C16
touch
. Remove the tablet from the de-
vice.
2.
To prevent health damage the following must be observed when moving the device
in the laboratory (lifting and carrying):
For reasons of safety, 2 persons are required to transport the device and must
position themselves on both sides of the equipment.
Because the device does not have carrying handles, grip the device firmly with
both hands at the lower device end, but not in the door area. Make sure the
doors are closed before lifting the device simultaneously.
Observe the guide values and adhere to the legally mandated limits for lifting
and carrying without auxiliary means!
3.
For installation at the new location, observe the notes in section “Installation con-