Automatic Boat Drive
Safety instructions
7
2
Safety instructions
2.1
General notes
NOTICE
This user manual is only valid in conjunction with the following documents:
user manual of the analyzer and software manual of the multiWin control and analysis
software.
Observe in particular the notes in the "Safety notes" chapters of the user manuals. The
notes included there apply analog also to the ABD without any limitations. Special dan-
ger emanating from the ABD is referred to in the following chapters.
For your own safety and to ensure error-free and safe operation of the ABD, please read
this chapter carefully before commissioning.
Observe all safety notes listed in this user manual and observe all messages and dis-
played by the control and analysis software on the monitor.
2.1.1
Safety markings
The warning labels and safety symbols attached to the device are an integral part of the
device and must be strictly observed.
CAUTION
Danger of incorrect actions leading to personal injury and material damage due
to missing warning notes!
Warning notes and safety symbols must not be removed!
Before switching on the device, check that warning notes and safety symbols are com-
plete and intact.
Do not put the device into operation if warning notes or safety symbols are missing or
damaged.
Damaged or missing warning notes or safety symbols must be replaced without delay.
The following symbols are attached to the device:
Symbol
Meaning
Remark
Disconnect the power
supply before opening
the device cover.
Before opening the device cover,
switch off the device and disconnect
the mains plug from the mains
socket.
Observe the operating
manual
Before starting work, read the oper-
ating manual.
Warning against a haz-
ard location!
Warning against mechanical danger
from moving equipment parts!