background image

Page 27

CARE OF THE EXTERIOR

EXERCISE SYSTEM SHELL

Your 

SWIMCROSS 

exercise system has an acrylic shell. Stains and 

dirt generally will not adhere to your exercise system’s surface. A soft 

rag or a nylon scrubber should easily remove most dirt. Most household 

chemicals are harmful to your exercise system’s shell (see below for 

detailed information on cleaning agents). Always rinse off any exercise 

system shell cleaning agent with fresh water.

IMPORTANT:

1.  The following products are the ONLY approved cleaning agents 

for your 

SWIMCROSS 

exercise system shell: plain water, Spa 

Shine, or Soft Scrub

®

. The use of alcohol or any other household 

cleaner other than those listed to clean the exercise system shell 

surface is NOT recommended. DO NOT use any cleaning products 

containing abrasives or solvents since they may damage the shell 

surface, specifically: Simple Green

®

, Windex

®

 or Spa Mitt. NEVER 

USE HARSH CHEMICALS! Damage to the shell by use of harsh 

chemicals is not covered under the warranty. Always rinse off any 

exercise system shell cleaning agent with fresh water.

2.  Iron and copper in the water can stain the exercise system shell if 

allowed to go unchecked. Ask your 

ENDLESS POOLS

 dealer about 

a Stain and Scale Inhibitor to use if your exercise system has a 

high concentration of dissolved minerals. (

WATKINS WELLNESS

 

recommends Stain & Scale Defense.)

3.  Keep all cleaners out of the reach of children and use care when 

applying.

EXERCISE SYSTEM CABINET 

All exercise systems use the exclusive all-climate cabinet designed for 

years of performance. The unique design is made from a rigid polymer for 

durability and adds a film finish that provides a rich appearance.
Cleaning consists of simply spraying the cabinet with a mild soap and 

water solution to remove any stains and residue. 
Do not rub the cabinet with an abrasive material or use abrasive 

cleaners as this may damage its surface. 

VINYL COVER (OPTIONAL)

The vinyl cover is an attractive, durable foam insulation product. Monthly 

cleaning and conditioning are recommended to maintain its beauty.

To clean and condition the vinyl cover without a lifter:
1.  Remove the covers from the exercise system and gently lean 

against a wall or fence.

2.  With a garden hose, spray the covers to loosen and rinse away dirt 

or debris.

3.  Using a large sponge and/or a soft bristle brush, and using a very 

mild soap solution (one teaspoon dishwashing liquid with two 

gallons of water), or baking soda (sodium bicarbonate), scrub the 

vinyl top in a circular motion. Do not let the vinyl dry with a soap film 

on it before it can be rinsed clean.

4.  Scrub the cover’s perimeter and side flaps. Rinse clean with water.
5.  Rinse off the underside of the cover with water only (use no soap), 

and wipe it clean with a dry rag. 

IMPORTANT:

 To remove tree sap, use cigarette lighter fluid (not 

charcoal lighter fluid). Use sparingly, and rinse with a saddle soap 

solution immediately afterwards, then wipe dry.

Care and Maintenance

Summary of Contents for X2000 SwimCross





































Reviews: