Page 16
Operating Instructions
LIGHT CONTROL
All exercise systems are equipped
with a lighting system. This system
includes a main interior light inside
the swim side, interior points of lights
located throughout the swim side, as
well as exterior lights around the entire
exercise system.
Press the
(middle right) button
(when in the home screen) to activate
the exterior lights and center light icon. Press a second time to turn
exterior lights and center icon light off.
Press the
(lower right) button (when in the home screen) to activate
all interior swim side lights and right light icon. Press a second time to
shut all interior swim side lights and right icon light off, when turning back
on after several seconds the same light mode will appear.
Every time the light is turned off and on quickly a new light mode will
appear.
The sequence is as follows: White, Aqua, Magenta, Azure, Amber,
Emerald, Ruby, color wheel with abrupt color changes, slow full color
wheel and fast full color wheel.
NOTE:
If left on, the lights will automatically turn off after 4 hours of
operation.WI-FI In.touch (optional)
WI-FI IN.TOUCH (OPTIONAL)
If your swim side is equipped with the Wi-Fi in.touch module you will be
able to use the internet or your home Wi-Fi network to control you swim
side by downloading an App to your favorite devices.
See Wi-Fi in the spa side Settings section to connect your swim side to
your home Wi-Fi network.
For instruction on how to download the App to your device search "gecko
in.touch" in your App store.
PURGE CYCLES
When your exercise system is first powered up, the default purge cycle
is set to start at 12:00 pm turning each swim jet pump on for 1 minute
using the
Beginner
Water Care mode. Unless you set the time using
the control panel (see Date & Time under Settings) the exercise system
purge cycle will start at power up and repeat every 12 hours.
We recommend setting your date and time first, then going to the Water
Care section and making any desired changes for days and purge start
times in the desired Water Care Mode.
The purge cycle will activate one
swim jet pump for 1 minute followed
by the second swim jet pump for an
additional 1 minute.
NOTE:
Power interruption of the
exercise system will not change the
purge cycle settings when power is
regained.
PURGE CYCLE SUSPENSION:
The purge cycle will be suspended every time a jet pump or
light is activated manually during the purge cycle time. The
suspension will end 10 minutes after the completion of the
manual use.
ALL OFF / MEMORY ON
Press the
(middle right) button
when in the home screen to turn the
lights and any jets that are on OFF.
If you press this button again before
pressing the light or jets button it
will bring up the last settings before
shutting off.
NOTE:
The color of the lights will
however advance to the next sequence.
Summary of Contents for X2000 SwimCross
Page 1: ...X2000 SwimCross System OWNER S MANUAL 50HZ by Endless Pools...
Page 34: ......
Page 35: ......
