Endless Pools X2000 SwimCross, Owner'S Manual

Page: 21 / 36

Page 18 Operating Instructions
You have several possibilities for
the schedule (Mon-Fri, weekend,
every day, or single days). The
schedules will be repeated every
week. Once you have set the
schedule, use (top left) lit
button to go back. Ensure that you
have selected the desired Water
Care option in the main Water Care menu.
MAINTENANCE
From the Settings page you can
access the Maintenance menu,
which gives you access to the
following options:
• Maintenance reminders
• Standby
Use the or buttons to make
a selection, and (middle left) lit button to select.
MAINTENANCE REMINDERS
The control panel will remind you of
maintenance required on the spa
side, like rinsing or cleaning the
filter. Each task has its own duration,
based on normal use.
The Maintenance reminders menu
allows you to verify the time left
before maintenance is required, as
well as to reset the time once a task is completed.
Use the or buttons to move through the list.
To reset a task select it by pressing the
(middle left) lit button, then
confirm by pressing the lit button next to confirm when prompted. Once
you have confirmed the task will be reset.
STANDBY
The Standby mode allows you to service
the spa side. Pumps will stop for 30
minutes, and automatically restart after
this time. Press (middle left) lit button
to activate Standby mode.
Once Standby mode has been activated
a screen will appear to show that pumps
are stopped. The normal page will return
at the end of maintenance.
Press on the button next to cancel to leave Standby mode and restart
the spa side.
DATE AND TIME
Here you can adjust the time
format, change the year, date, and
time. Use the or buttons to
choose the setting that you want to
adjust, and select it by pressing
(middle left) lit button.
Use the or buttons to
change the parameters, and
(middle left) lit button to move between parameters. Press (top left)
lit button to take you back to the main Settings menu.
KEYPAD SETTINGS
In this section, you can change the
temperature unit, language, display
orientation, rim control panel light
color, and lock the control panel.
Use the or buttons to
choose the setting that you want to
adjust. Select it by pressing the
(middle left) lit button then use
the or buttons again to change the setting.
When you change the display orientation, the contextual options and
or buttons adjust to the chosen orientation. The Invert screen and
Setting buttons remain unchanged, as well as the jets and lights buttons in
the home page.
Security settings allow you a Partial (Temperature) lock or Full (entire
control panel) lock. Select Security screen by pressing the (middle
left) lit button then use the or buttons to change to Full, Partial or
Unlock. Press (top left) lit button to display an information screen
telling you to press and hold (top left) button for 5 seconds to lock.
To unlock Full, press and hold (top left) button for 5 seconds.
MISCELLANEOUS
In this section, you can turn the
Warm weather mode ON or OFF.
When ON the circulation pump
will shut OFF whenever the water
temperature gets 1°C (2°F) above
the set point.
Press the
(middle left) lit button,
then use the or buttons to change the Warm weather mode.
ELECTRICAL CONFIGURATION
Please do not make changes to this screen!
ABOUT
This section shows information about
the control panel software number, and
the revision numbers of the different
components of your system.