background image

SPA SIDE CONTROL PANEL

The spa side control panel provides a bright, full color display, and 

intuitive user experience, while its screen’s high resolution brings 

exercise system user interfaces to a new level. Loaded with a large 

amount of memory and a powerful on-board processor creating 

seamless graphic interface that exercise system users have been 

waiting for.

  

SPA SIDE CONTROL PANEL FUNCTIONS

When the screen is off, press any button to turn the spa side control 

panel screen on and display the home screen. After 30 minutes of 

inactivity the screen will shut off. 

The function description of the buttons below will only work from the 

Home screen. Once the swim side control panel is placed in a submenu 

the selection lights next to the buttons will light up to indicate which 

buttons may be selected for a specific screen function.

 SETTINGS

One press of the 

(Settings button) from the home page gives you 

access to a menu to manage the settings of your  exercise system 

where you will find:

• Water care

• Maintenance

• Date and time

• Keypad Settings

• Miscellaneous

• Wi-Fi (optional)

• Electrical configuration

• About

Use the    or   

buttons to move up and 

down in the list.  To select an option, press the lit button beside the 

desired highlighted option. 

IMPORTANT:

  At any point you can press the 

 (Settings button)  to 

return to the home screen or  top left button (hydromassage jets) to go 

back.

WATER CARE

The Water Care section will help you 

set up your ideal filtration and heating 

settings. Choose from Away from Home, 

Beginner, Energy Savings, Super Energy 

Savings, and Weekender, depending on 

your needs..
Use 

 (middle left) button to choose 

your setting. A green check mark will 

appear on the selected icon to confirm.
When in Economy mode, the heating set point will be reduced by 20°F 

(11°C), which means that the heating system will not come on during 

the set time unless the temperature falls 20°F (11°C) below the set 

temperature.
The filtration schedule shown on the screen will apply to the spa side 

circulation pump. 

WATER CARE MODES

Away from home:

In this mode the spa side will always be in economy mode; 

the set point will be reduced by 11°C (20°F).

Standard - Beginner:

The System will never be in economy mode and will be 

filtering according to the pack's low level configuration.

Energy Savings:

The spa side will be in economy mode during the peak hours 

of the day and resume normal mode on the weekend.

Super Energy:

The spa side will always be in economy mode during peak 

hours, every day of the week.

Weekender:

The spa side will be in economy mode from Monday to Friday, 

and will run normally on the weekend.  

Default Settings:

By selecting this setting you will be asked to confirm your 

choice. Doing so will revert all Water Care Modes back to 

factory settings.

MODIFYING SCHEDULES

To modify a Water Care category, use 

the 

(middle right) lit button, to open 

the selected Water Care menu. The 

menu screen is divided into two settings, 

Economy and Filter cycle with Economy 

being first. Set or change the Day, Start 

and Stop time if desired to keep the 

heater off (Economy mode). Scroll down 

to set or change the Filter cycle Day, Start and Duration. 
You can add schedules by scrolling down   to Add, and selecting by 

using the 

 (middle left) lit button.

To delete a highlighted schedule, press 

 (top right) lit button.

You can modify the schedules by selecting 

 (middle left) lit button 

and adjusting the schedule using the   or   buttons. Press 

(middle left) lit button to move between parameters.

Page 17

Hydromassage Jets

Settings

Hydromassage   

           Jets

Selection Lights

Selection 

Button

Selection Button

All Off/

Memory On

Up/

Temperature

Down/

Temperature

Spa Lights

Invert 

Screen

Operating Instructions

Summary of Contents for X2000 SwimCross





































Reviews: